Comments on: Woodworking Finishes – Stain and Wood Filler http://www.sawdustonthefloor.com/2344/woodworking-finishes-stain-and-wood-filler/ Woodworking Tips, Projects and Tool Reviews for Todays Woodworker Wed, 01 Sep 2010 18:50:47 +0000 hourly 1 By: The JerseyWoodworker http://www.sawdustonthefloor.com/2344/woodworking-finishes-stain-and-wood-filler/comment-page-1/#comment-2283 The JerseyWoodworker Sun, 11 Apr 2010 23:17:16 +0000 http://www.sawdustonthefloor.com/?p=2344#comment-2283 Ike: You might want to consider adding a couple of bar clamps to your set up. If you were to position them so that they clamp the stock to the fence, that would keep everything aligned as you move the table past the blade. Since your blade guard is always in place when you cut, there shouldnt be any concern about the clamps inadvertently making contact with the blade, should they become loose. Ike:

You might want to consider adding a couple of bar clamps to your set up. If you were to position them so that they clamp the stock to the fence, that would keep everything aligned as you move the table past the blade. Since your blade guard is always in place when you cut, there shouldnt be any concern about the clamps inadvertently making contact with the blade, should they become loose.

]]> By: Ike silver http://www.sawdustonthefloor.com/2344/woodworking-finishes-stain-and-wood-filler/comment-page-1/#comment-2268 Ike silver Thu, 08 Apr 2010 01:24:44 +0000 http://www.sawdustonthefloor.com/?p=2344#comment-2268 Great idea,can't wait to give a try. Question. Have a portable,10in. Ryobi saw with a sliding mitre table. The settings on the tool are extremely accurate. Having difficulty cutting a wide board eg. 8 to 12 ins. perfectly square. Is there a hold down clamp available for this type of machine,so that accurate square cuts can be repeated? Thanks for your tips. Looking forward to getting down to the store in Dallas, one day & meeting the crowd,once we're settled in & the house is turned into a home. We're recent immigrants from Montreal, Quebec, & it was a true discovery finding you people. The word has been passed on to friends, back home (excuse the expression). Great idea,can’t wait to give a try.
Question. Have a portable,10in. Ryobi saw with a sliding mitre table. The settings on the tool are extremely accurate. Having difficulty cutting a wide board eg. 8 to 12 ins. perfectly square. Is there a hold down clamp available for this type of machine,so that accurate square cuts can be repeated?
Thanks for your tips. Looking forward to getting down to the store in Dallas, one day & meeting the crowd,once we’re settled in & the house is turned into a home. We’re recent immigrants from Montreal, Quebec, & it was a true discovery finding you people. The word has been passed on to friends, back home (excuse the expression).

]]>